VMware Tools 10.2.5: Changes to VMXNET3 driver settings

Last week VMware released a new version of VMware Tools.

VMware Tools 10.2.5

It might look like a minor upgrade. However, it includes important changes to the Receive Side Scaling (RSS) and Receive Throttle options in VMXNET3 driver which require attention and careful planning when implemented.

According to the vendor:

RSS is a mechanism which allows the network driver to spread incoming TCP traffic across multiple CPUs, resulting in increased multi-core efficiency and processor cache utilization. If the driver or the operating system is not capable of using RSS, or if RSS is disabled, all incoming network traffic is handled by only one CPU. In this situation, a single CPU can be the bottleneck for the network while other CPUs might remain idle.

Despite all benefits, this technology has been disabled on Windows 8 and Windows 2012 Server or later due to an issue with the vmxnet3 driver which affects Windows guest operating systems with VMware Tools 9.4.15 and later.

It was finally resolved in mid-2017 with the release of VMware Tools 10.1.7. However, only vmxnet3 driver version in VMware Tools 10.2.0 was recommended by VMware for Windows and Microsoft Business Critical applications.

Few months after, VMware introduces the following changes to vmxnet3 driver version

  • Receive Side Scaling is enabled by default,
  • The default value of the Receive Throttle is set to 30.

If you install VMware Tools 10.2.5 on a new virtual machine with Windows 8 and Windows 2012 Server or later, those settings will apply automatically; with the VMware Tools upgrade, they remain the same as it was before.

To check the current status of RSS and the Receive Throttle, you can execute the following PowerShell script inside the VM:

Get-NetAdapter | Where-Object { $_.InterfaceDescription -like “vmxnet3*” } | Get-NetAdapterAdvancedProperty | Where-Object { $_.RegistryKeyword -like “*RSS” -or $_.RegistryKeyword -like “RxThrottle” } | Format-Table -AutoSize

If you would like to edit those advanced options for all VMXNET3 NICs inside the VM, it can be done with the following two lines:

Get-NetAdapter | Where-Object { $_.InterfaceDescription -like “vmxnet3*” } | Set-NetAdapterAdvancedProperty -DisplayName “Receive Side Scaling” -DisplayValue “Enabled” -NoRestart
Get-NetAdapter | Where-Object { $_.InterfaceDescription -like “vmxnet3*” } | Set-NetAdapterAdvancedProperty -DisplayName “Receive Throttle” -DisplayValue “30” -NoRestart

Remember that after applying those settings, the virtual machine should be rebooted. As a result, the output will look similar to this:


The only thing that is left is to perform thorough testing. Some ideas how to do it can be found in here.

25/04/2018 – Update 1: VMware released a knowledge base article about Windows 7 and 2008 virtual machines losing network connectivity on VMware Tools 10.2.0. To resolve this issue they recommend to upgrade to VMware Tools 10.2.5.

01/05/2018 – Update 2: VMware released VMware Tools 10.2.1. This minor update resolves an issue when ‘network ports are exhausted on Guest VM after a few days when using VMware Tools 10.2.0’.

One thought on “VMware Tools 10.2.5: Changes to VMXNET3 driver settings

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s